Editorial illustration: RaLeno PLV-S116: Selection and Compatibility

Raleno Plv-S116: A Filming-Light Selection and Compatibility Guide

For the RaLeno PLV-S116, check the exact unit’s mounting interface, power requirements, and lighting performance before treating it as compatible with your setup. The provided idealo listing describes a continuous LED video light with a USB connection, a 1/4-inch tripod thread, and a shoe adapter, but contains conflicting color-temperature ranges. It is a secondary listing, not manufacturer documentation or an independent performance test. [src_1]

What the Available Listing Establishes

The provided evidence is one German price-comparison page for the RaLeno PLV-S116. Its product details describe continuous LED lighting, adjustable brightness, battery power, an LCD, a USB connection, a 1/4-inch tripod thread, and an included shoe adapter. These are attributed listing descriptions, not independently verified specifications. [src_1]

There is a material inconsistency: the product details and FAQ describe a color-temperature range of 3,200–5,600 K, while offer titles on the same page state 2,500–6,500 K. The supplied evidence does not resolve that difference. Do not combine these descriptions into a single confirmed specification. [src_1]

Use documentation matching the model label and hardware revision of the actual unit to resolve any discrepancy. This guide does not establish measured output, color accuracy, battery endurance, or compatibility with a particular camera.

Check Physical Compatibility Separately

Although idealo labels camera suitability as “Universal,” that description does not confirm fit with any named camera, cage, phone holder, or stand. The same page lists a 1/4-inch thread and a shoe adapter. Treat those details as starting points for inspection, not a blanket compatibility guarantee. [src_1]

Before attaching the light, compare the actual interfaces and check the support’s documented load limit. Inspect adapter engagement, tightening clearance, and access to the camera’s controls. For a phone setup, verify the holder’s accessory mounting provisions rather than assuming the light attaches directly to the phone.

This guide concerns continuous lighting. Do not infer flash-trigger compatibility or camera-controlled brightness from the listing’s mention of a shoe adapter.

Mounting Inspection Checklist

- Record the model label on the light.
- Identify the mounting interface on the camera, cage, holder, or stand.
- Confirm the required adapter is present and fits without forcing it.
- Check the support and adapter load limits in their documentation.
- Confirm that tightening the mount does not obstruct controls or cables.
- Inspect the assembled setup for looseness before filming.

Verify Power and Recording-Duration Requirements

The listing describes battery power and a USB connection. Its FAQ also states that operation while charging is possible. These statements are not a substitute for the exact unit’s electrical requirements or operating instructions. [src_1]

Before connecting power, confirm the connector type, required input, cable requirements, and permitted charging behavior in matching documentation. The supplied reference does not establish a complete electrical compatibility specification.

For a planned recording, test the intended brightness, color-temperature setting, and power arrangement for the full session duration. Record any dimming, shutdown, or power interruption. Do not treat an advertised battery capacity or runtime as a guarantee for your recording conditions.

Evaluate Suitability with a Controlled Filming Test

Use a repeatable test rather than deciding from the model name or LED count. Place the light where it would sit during the actual recording and keep camera exposure and white balance fixed while comparing settings.

Review a short clip for adequate exposure, distracting reflections, unwanted shadows, visible banding, and color consistency. Repeat at the frame rates and shutter settings you intend to use. This is a suggested evaluation method, not a claim that the PLV-S116 passes or fails any of these checks.

Keep three decisions separate: whether the mount fits, whether the power arrangement is documented and suitable, and whether the recorded image meets your needs. The supplied listing alone cannot settle all three.

Filming-Test Record

Model label and revision:
Mount and adapter:
Power source and cable:
Light-to-subject distance:
Brightness and color-temperature settings:
Camera exposure and white balance:
Frame rate and shutter setting:
Planned session duration:
Observed exposure, shadows, reflections, or banding:
Observed power interruptions:
Unresolved documentation questions:

FAQ

Does the Raleno Plv-S116 Fit Every Camera?

That is not established by the provided evidence. Idealo lists universal camera suitability, a 1/4-inch tripod thread, and a shoe adapter, but does not verify fit with specific camera models. Check the actual interfaces, clearances, and support limits. [src_1]

Which Color-Temperature Range Should I Rely On?

The provided page is inconsistent: its product details give 3,200–5,600 K, while offer titles give 2,500–6,500 K. Neither range should be treated here as confirmed for your unit. Resolve the discrepancy using documentation that matches its model label and revision. [src_1]

Can the Light Run While Charging?

The idealo FAQ says operation while charging is possible. This guide has not independently verified that statement. Confirm the exact unit’s instructions, power requirements, and permitted charging behavior before relying on it for a recording. [src_1]

Sources